Atomik 8G Micro Servo

Product Photos

Atomik 8G Micro Servo

The 8G Micro Servo is standard equipment in our Brake Kit for the GPV-1 Motorcycle, and Remote Diff. Lock Kit for the Atomik Creeper and Safari Creeper. Its small and compact nature is perfect for applications where lightweight, and size are required. Also great for use on small parkflyer airplanes and fits in the same footprint as most micro servos on the market.

Features:

Specifications:

Age Rating:
Scale:
Length:
Width:
Height:
Wingspan:
Weight:
Overall Height:
Diameter:
Flying Weight:
Roof Height:
Wheelbase:
Tire Dims:
Beam:
Ground Clearance:
Motor or Engine:
Batteries:
Chassis:
Charger:
Body:
Fan:
Radio:
Drive Train:
Speed Control:
Servos:
Shock Type:
Ball Bearings:
ESC:
Continuous Current:
Battery Cell Count:
Dimensions:
Weight:
BEC:
Idle RPM:
Max Current:
RPM/V (Kv):
Battery Cell Count:
Displacement:
Bore:
Stroke:
Max HP:
Fuel Type:
Ignition:
Carburetion:
Net Weight:
Manual Pull Start:
Battery Type:
Dimensions:
Plug Type:
Lithium ELC in Grams:
Wire Gauge:
Capacity:
Cell Count:
Cell Configuration:
Volts:
Amp Rating:
Charge Rate:
C Rate:
Continuous Discharge:
Min Discharge Volts Per Pack:
Max Burst Rate:
Max Volts Per Cell:
Max Volts Per Pack:
Watt Hours:
Input:
Output:
Operating Voltage:
Circuit Power:
Charge Current:
Current Drain of Balancing Lipo:
NiCD/NiMH Cell Count:
LiPO/LiFe/Li-ION:
Pb Battery Voltage:
Lead Acid (Pb):
Discharge Rate:
Charge / Discharge Cycles:
Charge Current Range:
Li-ION/Polymer Cell Count:
Channel 1:
Channel 2:
Channel 3:
Channel 4:
USB:
Operating System:
Power Requirement:
PWM Frequency:
Setting:
BEC Voltage:
Programmable:
Battery Connector:
Turns:
Timing:
RPM:
Shaft Diameter:
Motor Dimensions:
Shaft Size:
Material:
Fits the Following Model(s):
Transmitter:
- Specifications:
- Code Format:
- Frequency:
- Channels:
- Transmiting Power:
- DC Input:
- Weight:
- Model Type:
- Modulation:
- Low Voltage Warnings:
- DSC Port:
- Includes:
Receiver:
- Part Number:
- Channel 1:
- Channel 2:
- Channel 3:
- Channel 4:
Recommended Batteries:
Display Contents:
Torque: 13.89-16.6 oz./in
Speed: 0.19/0.17 sec
Voltage: 4.8V-6.0V
Weight: 0.28 oz. (8 g)
Dims: 22.9 x 12.2 x 24.2 mm

Required Items:

Only Work With:

Tech Notes:

Certifications:

Replacement Items

GUARANTEE

All products are inspected and adjusted individually before leaving the manufacturer and are guaranteed to be free of material defects and manufacturing faults.

General Warranty Policies

Atomik products are warranted to be free of material and workmanship defects for a period of 30 days* from date of purchase for all electronic components and 90 days* for all non-electronic components. If a component is defective or was not correctly made, Atomik will, at its sole discretion, repair or replace the item free of charge. This warranty does not cover normal wear and tear, crash damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use.

Important Notice

Atomik assumes sole responsibility for our products; therefore, dealers should not be involved in any warranty issues. All warranty claims are to be directed to Atomik Customer Service.

Before returning any defective product, please contact Atomik Customer Service to receive a Return Merchandise Authorization Number. A dated, itemized sales receipt must accompany any product returned for warranty work.

Release of Liability

Atomik it's affiliates, manufacturers, distributors, or retail partners shall not be held liable for any accident, injury to persons, or damage to property resulting from use, misuse, or abuse of any Atomik product. In purchasing a Atomik product the user agrees to accept responsibility for all such risks.

Manual Sample:

Write a review Hide Form

Atomik 8G Micro Servo

Product Photos

Recent Videos

Atomik 8G Micro Servo

Features:

Specifications:

Required Items:

Only Work With:

Tech Notes:

Certifications:

Replacement Items