Island Hopper 3Ch RTF RC Airplane

Features:

Specifications:

• Age Rating: 14+
• Scale: 1:10 Scale
• Length: 29.5 in (749.3 mm)
• Width: 3.25 in (82.6 mm)
• Height:
• Wingspan: 37 in (939.8 mm)
• Weight: 15.5 oz (439.4 g)
• Overall Height:
• Diameter:
• Flying Weight:
• Roof Height:
• Wheelbase:
• Tire Dims:
• Beam:
• Ground Clearance:
• Motor or Engine: 370A w/ Gearbox
• Batteries: AAA 650mAh 9.6V NiMH
• Chassis: EPP Foam
• Charger: Wall Charger
• Body:
• Fan:
• Radio: 27MHz 3-CH FM Transmitter
• Drive Train:
• Speed Control:
• Servos:
• Shock Type:
• Ball Bearings:
• ESC:
• Continuous Current:
• Battery Cell Count:
• Dimensions:
• Weight:
• BEC:
• Idle RPM:
• Max Current:
• RPM/V (Kv):
• Battery Cell Count:
• Displacement:
• Bore:
• Stroke:
• Max HP:
• Fuel Type: Electric
• Ignition:
• Carburetion:
• Net Weight:
• Manual Pull Start:
• Battery Type:
• Dimensions:
• Plug Type:
• Lithium ELC in Grams:
• Wire Gauge:
• Capacity:
• Cell Count:
• Cell Configuration:
• Volts:
• Amp Rating:
• Charge Rate:
• C Rate:
• Continuous Discharge:
• Min Discharge Volts Per Pack:
• Max Burst Rate:
• Max Volts Per Cell:
• Max Volts Per Pack:
• Watt Hours:
• Input:
• Output:
• Operating Voltage:
• Circuit Power:
• Charge Current:
• Current Drain of Balancing Lipo:
• NiCD/NiMH Cell Count:
• LiPO/LiFe/Li-ION:
• Pb Battery Voltage:
• Lead Acid (Pb):
• Discharge Rate:
• Charge / Discharge Cycles:
• Charge Current Range:
• Li-ION/Polymer Cell Count:
• Channel 1:
• Channel 2:
• Channel 3:
• Channel 4:
• USB:
• Operating System:
• Power Requirement:
• PWM Frequency:
• Setting:
• BEC Voltage:
• Programmable:
• Battery Connector:
• Turns:
• Timing:
• RPM:
• Shaft Diameter:
• Motor Dimensions:
• Shaft Size:
• Material:
• Fits the Following Model(s):
• Transmitter:
  • Specifications:
  • Code Format:
  • Frequency:
  • Channels:
  • Transmiting Power:
  • DC Input:
  • Weight:
  • Model Type:
  • Modulation:
  • Low Voltage Warnings:
  • DSC Port:
  • Includes:
• 
  Receiver:
  • Part Number:
  • Channel 1:
  • Channel 2:
  • Channel 3:
  • Channel 4:
• Recommended Batteries:
• Display Contents:
• ESC Specifications:
  Dimensions: 31.75 x 17.5 x 91 mm
  Weight: 0.57 oz (16.2 g)
  Voltage Range: 8-12V
  Current: 6A Continuous / 30A Burst
  BEC: 5V/1A
  Overload Protection: Yes

Required Items:

Only Work With:

Tech Notes:

You will need (8) AA batteries for the transmitter.

Certifications:

• FCC Compliant
• CE Approved